The ALOS Rollfilm Reader 22E and 22EP are high quality motorized readers for 16mm rollfilm in open reels or cartridges.

Designed for maximum operating comfort and low cost operation.  The image on its large 12 by 13-inch screen is always crisp and uniform, whether the film is stationary or in motion.  That means struggle-free, easy reading all the time.

Data retrieval is quick and accurate because the 22E features variable speed control with a remarkably smooth slow scanning motion.

The 22E is an industry proven rollfilm reader.  Its standard features include 360° image rotating prism and a multi-purpose socket.  A wide range of easy-to-change lenses is available.

RollFilm 22E

Features

Constant Focus
The design of the film gate and the floating optical system ensure sharp image, when film is stationary or in motion.  A simple film track makes film loading extremely easy.  The reader accepts all normal and thin base 16mm films in open reels or cartridges.

Multi-Purpose Socket
A built-in feature that may be used to plug in a footswitch that drives the reader.  Or, the socket may be used for easy hookup to a computer assisted retrieval device. 

Fast Data Retrieval
A single operating knob for variable control of fast and slow, forward and reverse motion.  Film drive and film tension controlled by solid state electronics.  The high speed scan and an optional odometer locate a desired film section fast.  A remarkably smooth slow scan speed eliminates eye strain.

Image Rotation
The standard 360° image rotating prism allows normal position viewing of images filmed in comic or ciné mode.

Brilliant Optical and Lighting System
The universal condenser system combined with the advanced light source give this low cost reader unequalled overall image brightness.  Operator may replace lamps easily-no tools are required.  Any one of seven precision lenses (18x to 65x) will project high resolution images.

Adaptability
The 22E is a versatile reader that adapts easily to meet your office's present and future needs.

RollFilm 22E

Technical Specifications

General
Motorized reader for viewing 16mm microfilm on open reels or in 3M cartridges or Kodak magazines.  Usable for normal and thin films on polyester or acetate base, either diazo or vesicular type.

Motorized Film Drive
Continuously variable speed.  0 to 10 ft. (3m) per second in both directions.  The motors are protected by current and torque controls.  Solid-state electronics.

Film Thickness
0.07 – 0.16mm (2.5 to 6.3 mil ).

Lenses
Interchangeable.  Magnifications: 18x, 21x, 24x, 31.5x, 37x, 42x and 65x.

Focusing
Floating lens in threaded holder.

Condenser System
Universal for all lenses.

Image Rotating Prism
For 360° with all lenses.

Screen
W-13" (320mm), H-12" (300mm), blue, reading lines.

Odometer
1 digit = 5", with zero reset button.

Scanning
Independent image centering control.

Projection Lamp
Halogen 12V/100W FCR, over 1000 hours achievable at low intensity.

Light Intensity Switch
2 positions (Hi/Lo)

Thermostat
For the protection of the reader.

Electrical
115V, 60Hz, 120W - UL Listed
220V, 50Hz, 120W - CE Certified
240V, 50Hz, 120W - CE Certified

General
Motorized reader for viewing 16mm microfilm on open reels or in 3M cartridges or Kodak magazines.  Usable for normal and thin films on polyester or acetate base, either diazo or vesicular type.

Motorized Film Drive
Continuously variable speed.  0 to 10 ft. (3m) per second in both directions.  The motors are protected by current and torque controls.  Solid-state electronics.

Film Thickness
0.07 – 0.16mm (2.5 to 6.3 mil ).

Lenses
Interchangeable.  Magnifications: 18x, 21x, 24x, 31.5x, 37x, 42x and 65x.

Focusing
Floating lens in threaded holder.

Condenser System
Universal for all lenses.

Image Rotating Prism
For 360° with all lenses.

Screen
W-13" (320mm), H-12" (300mm), blue, reading lines.

Odometer
1 digit = 5", with zero reset button.

Scanning
Independent image centering control.

Projection Lamp
Halogen 12V/100W FCR, over 1000 hours achievable at low intensity.

Light Intensity Switch
2 positions (Hi/Lo)

Thermostat
For the protection of the reader.

Electrical
115V, 60Hz, 120W - UL Listed
220V, 50Hz, 120W - CE Certified
240V, 50Hz, 120W - CE Certified

Unique Features

Constant Focus
The design of the film gate and the floating optical system ensure a sharp image, when film is stationary or in motion. A simple film track makes film loading extremely easy. The reader accepts all normal and thin base 16mm films in open reels or cartridges.

Fast Data Retrieval
Up front push-button controls with three convenient speeds. Slow motion, scan and high speed are available for forward and reverse motion. Film drive and film tension are controlled by solid-state electronics. The high-speed scanning feature and odometer locate a desired film section fast. A remarkably smooth slow scan speed eliminates eye strain.

Image Rotation
The standard 360º image rotating prism allows normal position viewing of images filmed in comic or cine' mode.

Brilliant Optical and Lighting System
The universal condenser system combined with the advanced light source gives this low cost reader unequalled overall image brightness. Operator may replace lamps easily—no tools are required. Any one of seven precision lenses (18x to 65x) will project high resolution images.

General
Motorized reader for viewing 16mm microfilm on open reels, 3M cartridges or Kodak magazines. Usable for normal and thin films on polyester or acetate base, either diazo or vesicular type.

Motorized Film Drive
Push-button controls with three speeds in both directions. High speed at 10 ft. (3m) per second. The motors are protected by current and torque controls designed with solid-state electronics.

RollFilm 22EP

Specifications

Film Thickness:
0.07-0.16mm (2.5 to 6.3 mil).

Lenses:
Interchangeable. Magnifications: 18x, 21x, 24x, 31.5x, 37x, 42x and 65x.

Focusing:
Floating lens in threaded holder.

Condenser System:
Universal for all lenses.

Image Rotating Prism:
For 360º with all lenses.

Screen:
W-13" (320mm), H-12" (300mm), blue, reading lines.

Odometer:
1 digit = 5", with zero reset button.

Scanning:
Independent image centering control.

Projection Lamp:
Halogen 12V/100W FCR, over 1000 hours achievable at low intensity.

Light Intensity Switch:
2 positions (Hi/Lo).

Thermostat:
For the protection of the reader.

Electrical:
115 V, 60Hz, 120 W.
220 V, 50 Hz, 120 W.
240 V, 50 Hz, 120 W.
Complies with international safety regulations.

Fuse:
1.25 A, slow-blow.

Overall Dimensions:
W-13" (3 cm), D-21" (55cm), H-20" (52cm).

Base Area:
W-13" (34cm), D-10" (25cm).

Weight:
20 lbs. (9kg).

Accessories:
3M adapter kit.

CannonDirect is not affiliated with Canon Inc. If you're looking for the company Canon, click here.

Some equipment is available on the preowned market and is reconditioned and offers a limited 30 day warranty.  All our equipment is guaranteed to arrive in OEM operating condition. After the standard warranty period, you can call for service on an as-needed basis. CannonDirect offers free telephone and/or e-mail support. All information on this site is believed, but not guaranteed, to be accurate.

Trademarks, Copyrights, Registrations, etc. are the property of and belong to their respective owners and are presented here as a fair use, free service and under no circumstances should they be construed to mean there is any relationship with CannonDirect.  Please report any suggestions, errors, omissions, complaints, or praise to CannonDirect®.

All prices and equipment subject to change without notice.

Specifications and appearance are subject to change without notice

  Copyright © 1995-2008 CannonDirect.com All rights reserved .. E-mail: Webmaster

 Click Here for: Microfilm Toner Cartridges / Toners